|
|
|
VF engineering VW MK5 Front Mount Intercooler
VF Engineering is proud to announce their newest piece to the MK 5 2.0T product lineup. The new IC will double the capacity for cooling and greatly decrease your IAT's to an extremely desireable number. Boost Duty and Ambient air tempature graphs have been provided below.
- Billet turbo discharge venturi for stock turbo
- Discharge (pancake) pipe with billet stock IC quick connect
- Hotside split pressure pipe with billet stock IC quick connect
- Coldside merger pressure pipe
- Throttle body pipe
- Wide 3.5 inch front mount IC and VF cast flowed end tanks
Fitment: All MK5 2.0t vehicles
Introductory Price: $925.00
* Installation is available at our facility at an additonal cost.
Boost duty log
Ambient tempature log
|
|
|
2.0L 4 Cylinder 5 Valve Turbo Engines (Short or Long block)
Available as a long block or short block. These Engines includes:
- New Engine Block
- JE Forged Pistons-8.5 or 9.0:1
- JE Pins and Premium Ring set, End Gap set
- H-Beam Rods with ARP hardware
- New Forged or Cast Crankshaft
- Main Bearings
- Rod Bearings
- Main Bearing Girdle w/ Oil Scraper Installed
- ARP Main Bearing Studs
- Special 2.0 Liter Steel Head Gasket
- Modified Aluminum Oilpan (to accommodate girdle)
In addition, the long block includes:
- New Five Valve Cylinder Head
- Timing Belt Pulleys and Tensioner
- Turbo Head Bolts
- Water Pump
* Porting and Polishing Available at an additional cost
* May require Core
* Please contact us for pricing. Installation is available at our facility.
|
|
|
GMG Sport 4 Cylinder 20 Valve Heads
Available for your Audi these heads includes:
- New Big-Port European Cylinder Head
- Big Intake Ports: 54mm x 26mm (stock: 43mm x 26mm)
- Big Exhaust Ports: 36mm (stock: 33mm)
- Assembled with New Cams, Valves, Lifters, Springs, Seals etc.
* Please contact us for pricing. Installation is available at our facility.
|
|
|
GMG Competition Stroker Kits
In-house engine building is available at GMG. These stroker kits include:
- Forged Crankshaft
- Custom 4340 Connecting Rods
- Forged Pistons
- Main and Rod Bearings
The Competition Stroker Kits are available for:
2, 4, and 5 Valve 4 cylinder engines. Displacements range from 1984cc - 2090cc.
Compression ratios from 8.5:1 to 14.0:1 are available.
Price: $2439.00
2 and 4 Valve 5 cylinder engines. Displacements range from 2431cc - 2611cc.
Compression ratios from 8.5:1 to 14.0:1 available.
Price: $2739.00
|
|
|
APR 1.8T Transverse K04 Kit
The APR 1.8T Transverse K04 kit includes the K04 turbo, the compressor inlet O-ring, four exhaust studs,
one manifold to the turbo gasket, and one turbo-to-downturn gasket. This kit is a straightfoward turbo swap
that makes a big difference in the power output of the car.
This kit makes solid gains in both horsepower and torque. With no other mods than an APR Turbo-Back Exhaust,
the kit made 242hp/268lb-ft on 91 octane gas, and 245hp/275lb-ft on 93 octane gas. Although the exhaust is
not required, it is highly recommended.
Fitment: Golf/GTI/Jetta
Price: $1699.00
* Installation is available at our facility at an additonal cost.
|
|
|
Longitudinal 1.8T APR Stage 3 Kit
The APR Stage 3 Kit the cutting-edge turbo upgrade for your Passat 1.8T. These kits are made with the best
materials and engineering available, from the exhaust manifold to the hose clamps. APR's Stage 3 is offered in a
280hp version with a Stage 3+ 310hp version in the works. The highlights of the kit include the following:
- APR Investment Cast Inconel Exhaust Manifold
- Garrett/Allied Signal Ballistic Series Ball-Bearing Turbocharger
- APR High Flow Catalytic Converter
- APR Custom Cast Urethane and Silicone Intake Hoses
- APR High Flow Fuel Injectors
- All Associated Plumbing and Hardware
Fitment: 98-01 Passat 1.8T 5 Speed
Price: $4499.00
* Installation is available at our facility at an additonal cost.
* An exhaust system (sold separately) is required with Stage 3.
|
|
|
Transverse 1.8T APR Stage 3 Kit
APR announces the Transverse Stage 3 kit.
This kit is capable of 290 horsepower and 296 foot-pounds of torque at the flywheel on 93 octane gas,
while retaining stock-like drivability. The highlights of the kit include the following:
- APR Investment Cast Inconel Exhaust Manifold.
- Honeywell/Garrett Ballistic Series Ball-Bearing Turbocharger
- Larger APR designed Mass Airflow Sensor Housing
- APR Custom Cast Silicone Intake Hoses
- APR High Flow Fuel Injectors and Fuel Pump
- All Associate Plumbing and Hardware
Fitment: 01-04 Golf/GTI/Jetta 1.8T 5 Speed
Price: $4499.00
* Installation is available at our facility at an additonal cost.
* An exhaust system (sold separately) is required with Stage 3.
|
|
|
Transverse 1.8T APR Stage 3+ Kit
APR announces the Transverse Stage 3+ system. The ultimate turbo system upgrade is now available for the Golf,
GTI, and Jetta. This kit is capable of 340 horsepower and 320 foot-pounds of torque at the flywheel on 93
octane gas, while retaining stock-like drivability. The highlights of the kit include the following:
- APR Investment Cast Inconel Exhaust Manifold
- Honeywell/Garrett Ballistic Series Ball-Bearing Turbocharger
- Larger APR designed Mass Airflow Sensor Housing
- APR Custom Cast Silicone Intake Hoses
- APR High Flow Fuel Injectors and Fuel Pump
- All Associate Plumbing and Hardware
Fitment: 01-04 Golf/GTI/Jetta 1.8T 5 Speed
Price: $4999.00
* Installation is available at our facility at an additonal cost.
* An exhaust system (sold separately) is required with Stage 3+.
|
|
|
APR Front Mount 1.8T Intercooler Kit
APR is pleased to present their front mounted intercooler kit 1.8T VW engine.
The highlights of the APR Intercooler kit include the following:
- APR Cast End Tanks with Internal Vaning
- Top-Bottom Feed Extruded Aluminum Core
- Mandrel-Bent, Powdercoated Stainless Steel Plumbing
- APR Custom Silicone Intake Hoses
- All Associated Bracketry and Hardware
Fitment: 00-05 Golf/GTI/Jetta, 98-01 Passat
Price: $1199.00 for Golf/GTI/Jetta, $1049.00 for Passat
* Installation is available at our facility at an additonal cost.
|
|
|
Carbonio MkIV/MkIII Golf/GTI Cold Air Intake
Carbonio’s line of intakes for VW automobiles represents the pinnacle of induction design.
Each Carbonio MkIV/MkIII Kit Includes:
- Aerospace Grade Carbon Fiber Intake Section with Show Quality Finish
- Complete Photographic Instructions
- Ram Air Design Washable Cotton Gauze Filter
- Air Pump Breather Filter (if applicable)
- All Necessary Hardware
Fitment: 99.5-04 Golf/GTI 2.0/1.8T/VR6/TDI, 94-98 Golf/GIT VR6
Price: $279.00/$249.00 MkIV/MkIII
* Installation is available at our facility at an additonal cost.
|
|
|
Carbonio MkIV/MkIII Jetta Cold Air Intake
Carbonio’s line of intakes for VW automobiles represents the pinnacle of induction design.
Each Carbonio MkIV/MkIII Jetta Kit Includes:
- Aerospace Grade Carbon Fiber Intake Section with Show Quality Finish
- Complete Photographic Instructions
- Ram Air Design Washable Cotton Gauze Filter
- Air Pump Breather Filter (if applicable)
- All Necessary Hardware
Fitment: 99.5-04 Jetta 2.0/1.8T/VR6/TDI, 94-98 Jetta VR6
Price: $279.00/$249.00 MkIV/MkIII
* Installation is available at our facility at an additonal cost.
|
|
|
Carbonio R32 Cold Air Intake
Carbonio’s line of intakes for VW automobiles represents the pinnacle of induction design.
Each Carbonio R32 Kit Includes:
- Aerospace Grade Carbon Fiber Intake Section with Show Quality Finish
- Complete Photographic Instructions
- Ram Air Design Washable Cotton Gauze Filter
- Air Pump Breather Filter (if applicable)
- All Necessary Hardware
Fitment: 04 R32 VR6
Price: $279.00
* Installation is available at our facility at an additonal cost.
|
|
|
GMG GT Diverter Valves
GMG custom CNC-machined all aluminum diverter valves feature a piston design with upgraded
springs for better boost control. These valves also offer a finned heat sink to dissipate
heat. Our diverter valves are completely service-able and rebuildable. Viton
seals ensure excellent resistance to boost blow-by. These valves are a must for any chipped
car and also a great upgrade for non-chipped cars. Upgrade today!
Price: $125.00 each
* Installation is available at our facility at an additonal cost.
|
|
|
VF Engineering R32 Supercharger Kit
VF-Engineering is the first to develop and build a supercharger kit with true OEM quality and drivability.
It is also the first truly do-it-yourself and reversible conversion kit, using the famous "bullet proof"
Vortech Engineering supercharger unit. The key to the design of this supercharger kit is the simplicity
with which it can be bolted on. The kit is supplied with every part needed to get your car up and running
supercharged on the same day. The R32 kit comes in 2 stages:
Stage 1 includes:
- GIAC custom tuned stage 1 software
- RPM limiter increased to 7000 rpm
- Soft rev limiters and top speed governor removed
- Maximum SC pulley belt wrap design
- Polypropylene custom molded pipework
- Bosch OEM pressure relief bypass systems
- 6061 Billet aluminum CNC bracketry
- 4 ply silicon couplers with OEM screw clamps
- Army-Navy swivel fittings with high pressure OEM oil lines
- Proprietary Gates OEM serpentine belt
- Cold air intake with K&N induction filter and air box
- 1 year unlimited mileage warranty on major parts
- Optional 2 year warranty extension to 3 yrs for $150
- Precision Made in California, USA
| Stage 1 |
6.0 PSI |
320 HP |
260 LB. FT |
$4500.00
|
Stage 2 includes:
- Everything in Stage 1, plus
- GIAC custom tuned stage 2 software
- Upgraded fuel pressure regulator
- Upgraded supercharger pulley
- Replacement serpentine belt
- Additional idler with billet bracket
- Secondary bypass valve system
- 3" thick front mount air/air intercooler
| Stage 2 |
6.2 PSI |
350 HP |
275 LB. FT |
$1500.00 upgrade
|
Options:
- Race Gas: Software option for Stage 2 with 370hp and 300 lb. ft. To be used with high octane (100) such as VP Racing Fuels.
For use in conjunction with GIAC "flashloader" to switch modes.
Price: $250.00
- Flashloader: From GIAC. Allows you to switch between ECU program modes such as fuel quality programs, and valet or kill modes.
Price: $150.00
- Polished & Warranty: Polished finish supercharger unit and "product warranty" extension from standard 1 year to 3 years.
Price: $275.00
- Race Bypass Valve: Made from billet aluminum, replaces Bosch plastic valves supplied as standard.
Price: $150.00
* Installation is available at our facility at an additonal cost.
|
|
|
VF Engineering Golf/Jetta MkIV 24v Supercharger Kit
VF-Engineering is the first to develop and build a supercharger kit with true OEM quality and drivability.
It is also the first truly do-it-yourself and reversible conversion kit, using the famous "bullet proof"
Vortech Engineering supercharger unit. The key to the design of this supercharger kit is the simplicity
with which it can be bolted on. The kit is supplied with every part needed to get your car up and running
supercharged on the same day. The MkIV 24v kit comes in 2 stages:
Stage 1 includes:
- GIAC custom tuned stage 1 & 2 software
- RPM limiter increased to 7000 rpm
- Soft rev limiters completely removed
- Increased SC pulley belt wrap
- Additional idler pulley bracket for high boost stages
- Bosch OEM pressure relief bypass systems
- Polished ceramic aluminum coated mandrel bent pipework
- 6061 Billet aluminum CNC bracketry
- Polished ceramic aluminum coated pipework
- 4 ply silicon couplers with OEM screw clamps
- Army-Navy swivel fittings with high pressure OEM oil lines
- Proprietary Gates OEM serpentine belt
- Stage 2 high capacity Bosch fuel injectors
- 1 year unlimited mileage warranty on major parts
- Optional 2 year warranty extension to 3 yrs for $150
- Precision Made in California, USA
| Stage 1 |
6.0 PSI |
260 HP |
240 LB. FT |
$4000.00
|
Stage 2 includes:
- Everything in Stage 1, plus
- Boost increase from 6 to 8 psi
- 3" High flow intercooler rated to 500hp
- Additional billet tensioner idler and bracket
- High flow custom Bosch injectors to fit under the stock manifold
- Re-calibration housing for MAF
- Custom in-tank direct replacement OEM high flow fuel pump (rated to 420+hp)
- An additional pressure bypass system
| Stage 2 |
7.5 PSI |
305 HP |
260 LB. FT |
$1850.00 upgrade
|
Options:
- Flashloader: From GIAC. Allows you to switch between ECU program modes such as fuel quality programs, and valet or kill modes.
Price: $150.00
Polished: Option for polished finish supercharger unit, upgrade from standard satin finish.
Price: $125.00
- Warranty Extension: Option for "product warranty" extension from standard 1 year to 3 years unlimited miles.
Price: $150.00
- Race Bypass Valve: Made from billet aluminum, replaces Bosch plastic valves supplied as standard.
Price: $150.00
* Installation is available at our facility at an additonal cost.
|
|
|
VF Engineering Golf/Jetta MkIV 12v Supercharger Kit
VF-Engineering is the first to develop and build a supercharger kit with true OEM quality and drivability.
It is also the first truly do-it-yourself and reversible conversion kit, using the famous "bullet proof"
Vortech Engineering supercharger unit. The key to the design of this supercharger kit is the simplicity
with which it can be bolted on. The kit is supplied with every part needed to get your car up and running
supercharged on the same day. The MkIV 12v kit comes in 3 stages:
Stage 1 includes:
- GIAC custom tuned stage 1 software
- RPM limiter increased to 7000 rpm
- Soft rev limiters completely removed
- Increased SC pulley belt wrap
- Bosch OEM pressure relief bypass systems
- Polished ceramic aluminum coated mandrel bent pipework
- 6061 Billet aluminum CNC bracketry
- Polished ceramic aluminum coated pipework
- 4 ply silicon couplers with OEM screw clamps
- Army-Navy swivel fittings with high pressure OEM oil lines
- Proprietary Gates OEM serpentine belt
- 1 year unlimited mileage warranty on major parts
- Optional 2 year warranty extension to 3 yrs for $150
- Precision Made in California, USA
| Stage 1 |
6.0 PSI |
250 HP |
230 LB. FT |
$3750.00
|
Stage 2 includes:
- Everything in Stage 1, plus
- GIAC custom tuned stage 2 software
- Boost increase from 6 to 8 psi
- Larger custom OEM injectors to fit under the stock manifold
- Billet race bypass valve to replace bosch plastic valve
| Stage 2 |
8.0 PSI |
280 HP |
250 LB. FT |
$1250.00 upgrade
$750 w/ Stage 1
|
Stage 3 includes:
- Everything in Stage 2, plus
- GIAC custom tuned stage 3 software
- Boost increase from 8 to 9.5 psi
- 3" High flow intercooler rated to 500hp
- Polished ceramic aluminum coated intercooler pipework
- Flexible 4 ply silicon hump hose intercooler couplers
- Additional 6061 CNC billet tensioner idler bracket
- An additional pressure bypass system
- Proprietary Gates OEM serpentine belt
| Stage 3 |
10.0 PSI |
305 HP |
265 LB. FT |
$1400.00 upgrade
|
Options:
- Flashloader: From GIAC. Allows you to switch between ECU program modes such as fuel quality programs, and valet or kill modes.
Price: $150.00
Polished: Option for polished finish supercharger unit, upgrade from standard satin finish.
Price: $125.00
- Warranty Extension: Option for "product warranty" extension from standard 1 year to 3 years unlimited miles.
Price: $150.00
- Race Bypass Valve: Made from billet aluminum, replaces Bosch plastic valves supplied as standard.
Price: $150.00
* Installation is available at our facility at an additonal cost.
|
|
|
BMC Air Filters
GMG carries BMC Air Filters for all VW vehicles.
Price: From $59.95 each
* Installation is available at our facility at an additional cost.
|
|
* Please note: Prices are subject to change without notice. Please call for current pricing.
|
|
|
